a division of Jackson Aircraft Weighing Systems LLC provides Aircraft scales, Aircraft Weighing Equipment, Helicopter Scales and Large Jet Under Axle Weighing Systems.



Three 5,000lb cell transducers, one inch mounting, 15,000lbs total system capacity, digital indication.

Light aircraft scale, VLJ scale, light jet scale, aircraft scale, helicopter scale
Standars small aircraft top of jack load cell kit is great for light aircraft, light turbo prop singles, twins, and helicopters
m2000, M2000
M2000 three channel digital indicator is supplied with all our three channel kits, aviation software, multi point calibration 110 or 220 euro power capable
Click this picture to go to our jack adapter page to see how the cell mounts and the adapters we have avaialble
M2000 Features:
Units conversion: lbs/kg
Resolution: +/- 520000 A/D internal counts
Sampling rate: 100 times a second per channel
Span stability: 2ppm/deg C
Zero Stability: 5nV/deg C
Linearity correction: 10 span entries
Calibration Method: calibration through software stored in flash memory
Calibration Sealing: physical seal or Class1 Audit Trail system, password protected
Tare: Keyboard and scale tare, multiple tare id's can be stored in memory
Time and Date: Y2K compliant time/date clock, internal battery backup
Power On: selectable on/off switch


Analog Output: optional 4-20mA board via Smart Wire
Serial Output: 2 full duplex RS232/RS422 ports
IO Interface: peripheral expansion through Smart Wire multi drop RS485 port
External IO: up to 6 channel setpoint via Smart Wire
Baud Rate: 150-32,400 bps, selectable
Size: 6 digit, 7 segment 1" red LED
Filtering: Fast Step quick response algorithm adjustable filter

Modes: display from CH1, CH2, CH3, Scan, and total of all channels.

Power Requirements: 110VAC 220/50 Auto power universial, standard US or Euro two pin.
Temperature Range: -10deg C to + 40deg C
Sense Amplifier: differential amplifier with 4 and 6 wire
RFI Protection: filtered signal, excitation and sense lines
Canada: Class III/IIIHD 10000
USA: NTEP Class III/IIIl 10000
OIML: Pending
NIST traceable certification to calibration master.
Two year warranty on parts and labor, calibration on sale.  10% charge on returned sets for inspection, certification, calibration checks and restocking.
Cell Specifications:
·         Machined from steel to receive aircraft jack pads
·         Calibrated to customer specifications
·         Capacities are available in 5,000, 10,000, 15,000, 25,000, 30,000, 50,000 and 100,000lb cells
·         Accuracy: 1/10th of 1%
·         One inch mounting on standard aircraft jacks
·         Additional adapter mountings are available as an option (see below)

High accuracy, new radial top design, four colum elements.

Contact Larry Jackson for infromation and ordering at:  561-281-6179